- #Navcoder software drivers
- #Navcoder software update
- #Navcoder software Bluetooth
- #Navcoder software windows
To use with ICOM – change the Network adapter from NAT to Bridged with your LAN card.
#Navcoder software windows
Because this is Windows XP – to access the shared folder – right click on My Computer > Explore, from there click on the expand icon (+) right next to My Network Places and you should be able to see VirtualBox Shared Folders. The folder path is the location of the shared folder on your host operating system, while the name is how it will appear inside the guest operating system. Click the Add button or right-click in the list and select Add Shared Folder to add a new shared folder. There are two types of shared folders - Machine Folders are permanent folders that will be shared until you remove them, while Transient Folders are temporary and will be removed when the virtual machine restarts or shuts down. your Downloads folder where the SPDATEN probably will end up) – Machine > Settings option in a virtual machine’s window and select Shared Folders. To share a folder from your host machine (eg.
#Navcoder software drivers
Works with a K+Dcan cable – INPA, NCS Expert + NCS Dummy, WinKFP, EDIABAS, ToolSet 32, BMW Coding tool, NavCoder, BMW PassThru Tool + iToolRadar + Eas圜onnect for connecting with other cables (ICOM, Ethernet, etc.)Īll the posible K+Dcan USB drivers are available through the shortcut on the Desktop (USB Drivers) – for maximum compatibility with chineese noname ones try the OriginalCable subdirectory or FakeCableĪll the software comes with english interface and pre configured USB K+Dcan cable.įor coding – use the included BMW Coding tool and get SPDATEN from the internet. So to avoid software miss-function, working Virtualbox image was created.Īll the software and tools you might need for coding and flashing a BMW, are pre installed and configured in a Virtualbox image.
#Navcoder software Bluetooth
The Bluetooth module needs to power down and then back up again for the settings to take effect, this takes about 1 minute with no activity on the bus (opening doors etc).Inpa software collection does conflict with some other diagnostic software like Vida Dice (Volvo) etc. Disappointed I can't do what I originally set out to do (enable VR) but thems the breaks !! I thought as my car is a 2003 model it would have the later module? I am going to re-connect Navcoder at some point to see if I missed anything? Is there a module just for the Bluetooth?Īnyway, Navcoder and Resler work great and top marks to Jochen and Rolf. but nothing happened Its my understanding that you press and hold the button that dials numbers on the steering wheel and you should hear a tone? Anyway no tone so looks like I don't have the more recent Bluetooth module? I turned the ignition off for 15 seconds and then on and tried the Voice commands. I ticked the option for Voice Recognition and hit the 'Code' button and the settings were updated. I loaded the Telephone module and read it. There is some help info in Navcoder that I will leave to you to read before messing with your car. So then I got the Navcoder software reading the iBUS (you need to turn the ignition key to position 1) and could see information on the various modules.
You will need the USB drivers for the Resler that are on Rolf Resler's site. Just to clarify, there are 4 x wires from the Resler interface - I didn't need the Green, NTSC wire and I just matched the colours: white to white, red to red (the middle wire in the plug for power) and brown to brown. The plug I purchased from the Dealer did not have any pins inside that would insert into the loom connector and so it didn't work But never mind I simply removed the new plug and stripped the ends of the wires and pushed them in manually into the loom connector (not elegant but it worked) then kept them in place with tape. I might have been missing something but the plug that comes from my cars wiring loom and connects to the CD Changer requires the female plug to have pins that stick out inside an thus insert into the loom plug when connecting. I bought the parts as kindly suggested by RichardP - the plug was the correct fitting and I was able to solder the Resler wires to the bushing contacts.
#Navcoder software update
Hi all, thought I would provide an update of my experiences with the Resler interface and Navcoder.
0 kommentar(er)
